Daily Mail Reports iPhone 4 Story Based On Spoof Twitter Account #Fail

Apple boss Steve Jobs reveals iPhone 4 may be recalled

 

By Richard Ashmore

 

The much-vaunted new iPhone 4 may be recalled, Apple boss Steve Jobs revealed last night.

Posting a message on the social networking site Twitter, the tycoon said: ‘We may have to recall the new iPhone. This I did not expect.’

Launched in Britain last week, the £500 handset has been dogged by technical problems.

 

 

Steve Jobs shows Russian President Dimitry Medvedev the new iPhone 4. The Apple boss has revealed the new phone may be recalled following a glut of complaints

Steve Jobs shows Russian President Dimitry Medvedev the new iPhone 4. The Apple boss said the new phone may be recalled following a glut of complaints

Reception has been found to cut out when users cover a metal band built into the phone’s bottom left-hand corner.

The new iPhone was also said to be unsuitable for left-handed people.

Mr Jobs responded to complaints about the new iPhone losing its signal by telling users to ‘just avoid holding it in that way’.

Angry users have complained that the phone’s reception suddenly plunges to almost zero when they simply hold it in their hand.

Dozens of videos have been placed on YouTube showing the iPhone 4 losing signal the moment the metal antenna that surrounds the edge of the new device is covered.

Mr Jobs issued his bizarre advice as he responded to an email from a user on the Ars Technica technology news site who had complained about the sudden loss of signal.

 

A clip from an iPhone 4 advert which shows the model holding the device in the 'wrong' way

A clip from an iPhone 4 advert which shows the model holding the device in the ‘wrong’ way

 

In an astonishingly blunt response, Mr Jobs replied: ‘Just avoid holding it in that way. All phones have sensitive areas’.

In a statement, Apple said: ‘Gripping any mobile phone will result in some attenuation of its antenna performance, with certain places being worse than others depending on the placement of the antennas.’

‘This is a fact of life for every wireless phone. If you ever experience this on your iPhone 4, avoid gripping it in the lower left corner in a way that covers both sides of the black strip in the metal band, or simply use one of many available cases.’

Apple claims that using one of its ‘bumpers’ – which cost £25 each and clip over the iPhone to protect it – will stop the user’s hand interfering with the signal.

apple1iphone2.jpg

Another iPhone 4 ad shows the model’s hand blocking the antenna

The firm is selling the rubber bumpers on its website but none will be shipped to the UK until July 16th.

Users have flooded Twitter with rumours about the problem and stop-gap remedies including using tape to cover the bottom of the phone.

Left-handed users are being particularly affected because when they hold the phone in their left hand their fingers cover more of the right-hand side of the phone – where the antenna is.

The left side of the iPhone 4 receives Wi-Fi signals while the right side picks up the 3G signal for calls.

Technology website T3 ran a test using one of the ‘bumper’ cover for the phone which appears to solve the issue.

Danish wireless technology expert called Gert Frølund Pedersen told Wired magazine that the problem is probably because the phone’s new antenna is built into the metal frame which surrounds the device.

‘Human tissue will have an inhibitory effect on the antenna. Touch means that a larger portion of the antenna energy turns into heat and lost.

‘This makes the antenna less efficient to send and receive radio signals,’ he said.

A loss of signal, known as attenuation, can occur when an antenna is bridged.

Holding it in your hand will change the length of the antenna and interfere with the specific wavelengths it is calibrated to pick up.

The Apple iPad also faced some teething problems when it was launched with users reporting problems when they tried to connect to wi-fi. A software update had to be issued to sort this problem out.

 

A new iPhone complete with black rubber 'bumper' which Apple claims will help solve the problem

A new iPhone complete with black rubber ‘bumper’ which Apple claims will help solve the problem

And the iPhone 4 is not the first Apple 3G phone to have problems with its reception – users also reported problems with the earlier iPhone 3GS when it was first released too.

There have also been early reports of problems with the iPhone’s screen.

Launched by Steve Jobs as ‘retina display’, with an paralleled definition and number of pixels, some users in the US have complained about some yellow discolouration.

The spots can appear in corners and the thin bands have shown up toward the tops and bottoms of customers’ screens. 

Some Apple insiders on web forums have claimed that the yellow colour is down to the clue that the firm uses to bond the glass on its screens which has not had the time to evaporate.

They claim that the discolouration will clear after a day or two as the glue evaporates.

The iPhone 4 was unveiled earlier this month. At the time, Mr Jobs said it represented ‘the biggest leap since the original iPhone’.

It offers video calling, a higher-resolution display and the ability to record and view high-definition video.

The new handset updates the iPhone 3GS which launched a year ago and sold more than a million units in its first weekend.

A spokesperson for Apple was not immediately available to comment.

 

Note to web developers using Flash

I’ve started to send the following note to web developers each time I get stuck with a Flash video whilst on an iPad, iPhone or iPod.

Hi,

I’ve just visited your site using my iPad and was unable to watch video content due to the use of Adobe Flash. Have you considered using the web standard HTML5 for video instead of Flash?

Kind regards,

Hopefully if enough users complain something may be done about it.

Dim UK Tabloids Report Ghost App Prank

20100305-ghost.jpg

Ahh, bless ‘em. The hacks at The Sun aren’t famous for hard-hitting investigative journalism, but at least you’d expect them to know an iPhone app when they see one.

A couple of weeks ago a builder fooled them (and the Daily Mail) into believing that he’d taken a photo of a ghostly boy on a building site in Hull.

But as the internet pointed out shortly afterwards, anyone can make the exact same ghostly figure appear pretty much anywhere they like, thanks to the Ghost Capture app for iPhone.

Even funnier are some of the comments posted under the stories. On the Daily Mail’s version, for example, Mel from Stroud says:

“i am mildly psychic and i snese this boy was evacualted from the war,his father died,his mother died of old age,he lives with an old couple and this used to be his school,hopes this helps everyone”

(To be honest, I don’t think for a minute that the journalists at either paper actually believed that the photo was real, and they probably did instantly work out where it came from. But The Sun’s purpose is to entertain as much as it is to inform – so they wrote it up in all innocent seriousness, knowing that readers with a clue would be in on the joke. And that some readers would fall for it.)

via cultofmac.com

A quick look at Tweetie 2 v Twittelator Pro


Ok so I’ve been using Tweetie 2 for just over 24 hours now and here’s my initial thoughts compared to Twittelator Pro.

Tab bar

Tweetie 2 Tab Bar
While Tweetie 2 now informs you that new tweets have arrived since the last time you launched, it doesn’t show you how many.
Twittelator Pro Tab Bar
Whereas Twittelator Pro actually shows you the number of tweets which have arrived since the last time you launched it.

Tweet confirmation

Twittelator Pro displays a pop-up notification letting you know that your tweet has been sent. Tweetie 2 doesn’t give you any confirmation that the tweet has been sent and this is a problem when tweeting photos or large videos.

Attached photos

I also prefer the way Twittelator Pro displays attached photos:

Tweetie 2
Tweetie 2 indicates attached photos with this icon.
Twittelator Pro
Twittelator Pro shows an in-line preview of any attached photos.

 

  • Tweetie 2 has no ability to ‘hide’ users.
  • Tweetie 2 now supports TextExpander when composing tweets which is great, however I’ve noticed if you use this feature it results in a 4 second hang or lag each time you press ‘reply’ or ‘new tweet’.

Without a doubt both are great Twitter clients, for UI Tweetie 2 wins hands down (the way you refresh tweets is just pure class) but if you’re looking for a feature rich client Twittelator is the winner IMHO.

Hosting Your Own RSS Reader Using Fever

Pile

Fever http://feedafever.com/ $30

So if your like me you probbably subscribe to far too many RSS feeds, don’t get me wrong I love RSS it’s the way I get most of my news. Recently I’ve reached my limit of what I can resonably get through in any one day. I’d ideally subscribe to more feeds but I really don’t have the time to read them all. I’d rather not suffer the ‘unread item guilt’ or ’second inbox syndrome’ that you can sometimes get with unread feeds. This is where the RSS aggregator Fever from Shaun Inman can help.

How is Fever different?

Fever is unique in a couple of ways, firstly (and most importantly) it’s a self hosted web app, meaning the Fever installation is stored on your web server so you will need hosting that’s running a recent version of PHP and MySQL. Fever is also different in the way it handles your feeds, this means you can subscribe to many more feeds without suffering the unread item guilt. This is achieved by organising your feeds into two categories, ‘must reads’ and ‘could be interesting’ I’ll explain more about this later.

Installation

Before you can purchase Fever you will need to download a small package which will detect if your hosting provider is up to the job. Once your server successfully passes the compatibility tests you will be given an activation key to purchase Fever. Installation is fairly straightforward and there is even a video on feedafever.com showing you the complete install process. You may need to change the permissions of the Fever folder, presumably to allow future updates to be pushed out. Fever refreshes itself automatically, however I did encounter a problem setting up a cron job to refresh my feeds every 15 minutes. The command provided over on feedafever.com didn’t seem to work with my provider (SiteGround) but after a quick email to SiteGround they soon managed to get it working for me.

Setup

Once Fever is installed you will need to bookmark it’s homepage, by default the installation is placed at www.yourwebsite.com/fever/ You can now start to feed Fever with your existing feeds, this is easily achieved by importing the OPML file from your previous reader. There are four sections to Fever, the main section is called ‘Kindling’ this is where you place your ‘must read’ feeds, you can create groups of feeds here and these are read in the traditional way (although by default Fever hides unread counts). Next up are ‘Sparks’, this is where you file all the feeds that can be interesting but are quite high in volume. Link posts and Twitter feeds are ideal candidates to be thrown into the Sparks section as you’ll never be hassled by unread counts. Just toss your feeds into Sparks and forget them. Now here’s where Fever hots up, Sparks and Kindling combine to create the next section called ‘Hot’. Think of Hot as your own personal Digg site.

Hot
What’s hot?

Fever will analyse all your feeds (Kindling and Sparks) looking for matching links and will pick out the most frequently talked about links. These posts are arranged in order of their ‘Hotness’, giving popular/interesting posts a higher temperature and will place them at the top of the Hot list. It’s all based on body temperature (hence the name Fever) the more popular the posts (based on similar links) the higher the temperature. There is also a ‘Saved’ section where (as you would expect) posts are stored for reading later. At the bottom of the main menu is a search bar for tracking down those lost posts.

Fevers design is simple, minimalistic and well laid out which works really well. Favicons are used to represent the feeds in both the desktop and iPhone versions. Keyboard junkies will love it’s easy to navigate user interface. The arrow keys are used to move from pane to pane and up and down the lists. ‘Space’ will move you to the next post, hitting ‘S’ saves the post for reading later and pressing ‘A’ will mark the selected section as read. To expand a story you hit ‘enter’ and to view the entire post just hit arrow right.

Fluid

Shaun suggests using the site specific browser Fluid.app with Fever and provides a link to a rather nice looking icon and screenshots on how to configure Fluid. Fluid turns Fever into a standalone application complete with an unread dock badge.

Dock
Fluid

iPhone

Fever also works well on the iPhone as a web app, sharing the simple, easy to navigate style of it’s desktop big brother.

Iphone-page
iPhone version

A link to the web app can be saved to your iPhone home screen giving the impression of a native app. However it can sometimes take a good ten seconds to open over 3G and when viewing an external site the screen orientation can get a little goofed up, a quick tilt to the left or right soon fixes this though.

Img_0218
iPhone screen bug
Feed
A Post using Fluid.app
Img_0215
Same post on the iPhone

Conclusion

Used as just a standard RSS reader Fever works really well, I love the simple interface and easy to remember keyboard navigation shortcut keys. The ‘Hot’ section of Fever is a bonus, a place to find popular stories that you might otherwise have missed. The iPhone app also works really well and as it’s web based it stays perfectly in sync with the desktop.

For the last couple of years I’ve been using Google Reader on the desktop and more recently Byline on the iPhone and although I’d reached my limit of how many feeds I could reasonably get through in any one day I was happy with this setup. After using Fever for just over a week it has completely replaced my old configuration. I use Kindling in the same way I used Google Reader but every now and then I dip into Hot to… well.. see what’s hot!

Having said that the PHP MySQL app is obviously not as fast as a native OS X app such as NetNewsWire and this sometimes shows. Navigating through the pages can sometimes feel a little sluggish but you soon get used to it. It would have been nice to try an online demo installation of Fever before purchasing the app. The iPhone web app could do with a little polish, it sometimes feels a bit beta but I’m sure this will improve as the app matures. In the week that I’ve been using Fever there has been an update pushed which added some extra features and fixed a few bugs, I’m sure Shaun is committed to future updates.

A license for Fever costs $30 which is $30 more than most other readers such as Google Reader and NetNewsWire but I feel if you already have web hosting the great UI and the ‘Hot’ feature is well worth the money.

Dave Day 2009

The problem with Touch TextExpander.

Img_0210

TextExpander does NOT use the iPhones in-built dictionary to suggest corrections or complete the word you’re typing. As a result it makes composing text a nightmare.
The nature of this app requires you to compose all of your text in TextExpander and then it exports it to the required app, without Auto-Correction text input on the iPhone is very poor.

Listening to Last.fm in the car.

I recently rediscovered Last.fm thanks to the iPhone app and have been successfully using it whilst driving about in the car. Thanks to the good 3G coverage here in the UK Last.fm works pretty much how you would expect a proper FM station to work with hardly any buffering at all. Last.fm have recently updated their iPhone software and it’s now stable enough to use as your in-car solution.

The 3G usage is high so it drains the battery in no time, I have purchased a 12v cigarette charger and leave it plugged in whilst I use it. I also purchased a dummy cassette tape audio out which works a treat.

Check out my video demo below.

iPhone 2.0 ‘must have’ features.

So with the WWDC (and possible iPhone 2.0 release) only a couple of weeks away I’ve compiled a list of features for the 2nd gen Jesus phone. Even though I love my iPhone and wouldn’t be without it I’m forced to carry two devices around with me due to the iPhones lack of everyday mobile phone features such as MMS, video camera and Bluetooth file exchange.

With more and more countries promising imminent iPhone availability, Apple really need to address the shortcomings of the 1st gen iPhone if it is to be a worldwide success.

First off are four ‘must have’ features that should have been included on the 1st gen iPhone but for some strange reason were left off:

• MMS support
• Video camera
• 3G / 3.5G
• Bluetooth file exchange between other handsets

I believe these four features must be included for the iPhone to be a hit in Europe and Asia.

Next are features that have been common place for years on most handsets but again were missing from Apples first offering:

• Copy and paste
• SMS forwarding
• To do lists
• FM radio
• Sound recorder

Personally I’d still buy a 2nd gen iPhone even if the above five features were missing but that said, high-end mobile phones released nowadays should include them.

Lastly if the iPhone is to succeed in total world domination Apple simply need to throw in the following four features on June 9th:

• Flash & Java support within Safari
• GPS
• Front facing camera with iChat support
• 5 megapixel camera with better quality lens

I really hope we see most of these features added in the next generation iPhone, one things for sure, a 3G iPhone IS coming soon, let’s just hope Apple get it right second time around.

A guide to Twinkle, the native iPhone Twitter app.

Twinkle is, in my opinion, the best Twitter client out there. If you tweet whilst on the move using a jailbroken iPhone you really must give this native app a whirl, it’s even replaced Twitterrific as my client of choice, here’s why.

Twinkle is very similar to most other desktop Twitter clients and reminds me very much of Twitterrific, Twinkle however offers two other features that really add depth to using Twitter. The first thing Twinkle offers is a ‘Locate Me’ feature, this will automatically add your current iPhone location to your tweets enabling other Twinkle users to search tweets within a given radius.

The other thing Twinkle offers is the ability to add images to your tweets right at the posting screen.

‘Home’ page

This is the main home page, it shows a list of all recent tweets made by you and your friends, the most recent tweets are positioned at the top of the list. Tweets with a

icon indicate they have an image attached.
From this home page you can read a tweet in full, post a new tweet, refresh the list, view tweets located near you, view the ‘public’ tweet stream or to log out via the settings screen.

‘Message’ page

Clicking on a tweet in the home page brings up the ‘Message’ screen, from here you can read the entire tweet, reply to the tweet, send the tweeter a private message, follow/unfollow the user or view the users profile and previous posts. If the tweet has been made by another Twinkle user and contains a photo you can view the photo ‘full screen’ by pressing the paper-clipped photo image in the top right corner.
To post a new tweet you click the

icon in the top right corner of the home page, this then takes you to the new message page.

‘Posting’ screen

Posting a tweet is easy, simply tap in the top white posting window and start typing :)
The location window (positioned just underneath the posting window) should auto generate your location and while not quite as precise as GPS, it locates you to within a few miles, if you’d rather not share your location you can simply tick or untick the town or city, you can also turn it off completely from within the settings page.
Tapping on the

icon enables you to take a shot using the iPhones built-in camera and include it in the tweet. To remove the photo simply click

.
The photo is then visible in your tweet as a thumbnail which can be enlarged to full screen by tapping on the thumbnail from inside Twinkle or clicking the url from within other Twitter clients.

Replies and private messages have a light grey background and are shown on the ‘Personal’ tab of the main home page, icons indicate if the tweet is a reply

or a private message

. Personal messages are also shown on the main ‘All’ tab so you don’t miss them.

Direct messages & replies

New, unread tweets are shown by the generic

icon which is a nice touch.

Pressing the ‘Near Me’ tab shows tweets from other Twinkle users, you can choose to display tweets from the following distances 1, 2, 5,10, 25, 50, 100, 1,000, or 252,000 miles from your current location. It works very well and allows you to find other Twinkle users nearby and to even arrange local meet-ups. I had no idea there were so many other jailbroken iPhones in my town, I also find the 252,000 miles option very handy for finding new tweets from the surface of the moon :)

If you’ve never tried Twinkle (and have a jailbroken iPhone) I strongly advise you give it a try. I just hope it will be available to buy from the iTunes App Store once the new 2nd gen iPhone arrives!

digg_url = ‘http://www.dazaroonie.com/index.php?id=6358218669755248427′;